Single-color CNC Two-component Mixing Machine ACW1200
No.
ACW1200
Intro.
This single-color two-component mixing device offers computer control for high mix precision.
 |  |  |
| Control unit | Mixing Unit | Front control board |
| ACW1200CUT | ACW1200MUT-L | R.C.B.1200 |
Features
- High-grade mix precision :Unique original design provides uniform mixing, with an error factor of +/-5% or less during discharge flow change.
- Easy to clean :Cleaning can be done in a short time, greatly reducing excess cleaning solvent, paint waste, and VOC.
- Industry management functionality :The amount of base resin and paint hardening agent used are recorded separately, and processing can be performed via PC, enabling you to keep tabs on industry performance data.(When using optional products)
- Easy controls:Each type of work can be performed by switch or button, and a help function displays warnings and error content on screen.
- Easy maintenance :Valves can be easily attached/detached, making maintenance simple.
- Space-saving design :Compact design allows you to easily position the equipment in small booths, and by simply connecting solid two-component paint, pump, gun, and hose, then setting the mix ratio, you're ready to roll.
Specs
- Full View
| ACW1200L | ACW1200H | |
Mix ratio | 1:1～30:1 ※1 | ||
| Mix precision | +/-5% or less *2 | ||
| Compatible liquids | One type of base resin, one type of hardening agent | ||
Compatible viscosity (before mix) | 25～300mPa·s ※2 | 25～3,000mPa·s ※2 | |
Max. discharge correspondence | 100～1,000mL/min ※3 | 200～2,000mL/min ※3 | |
Supplied air pressure | 0.4 to 0.7MPa and over | ||
| Remarks | For low pressure | For high pressure | |
Control Unit
| Model | ACW1200CUT | ||
Operations environment | Temperature 0 to +40℃ / Humidity 10 to 80% (without condensation) | ||
| Operations atmosphere | Avoid exposure to corrosive gases, grit and dust, steam, dripping water, or direct sunlight | ||
| Transport storage | Temperature 10 to +50℃ / Humidity 10 to 90% (without condensation) | ||
| AC100V ±10% 50/60Hz | ||
| Power consumption | 3A | ||
| Dimensions | 400W×400H×250D mm ※4 | ||
| Mass | 30kg | ||
| Explosion-proof compatible | Non-explosion proof | ||
Mixing Unit
| Model | ACW1200MUT-L | ACW1200MUT-H |
Paint path max. pressure resistance | 1.5MPa ※5 | 25MPa |
| Supplied paint pressure | For low-pressure specs, more than 3 times the pressure needed for discharge is necessary. *5 | |
| Wetted material | Tungsten carbide, stainless steel, Teflon, polyester | |
| Suitable paint | Solvent two-component urethane and epoxy paints for top coating *6 | |
| Dimensions | 350W×375H×300D mm | 350W×375H×300D mm |
| Mass | 25kg | 25kg |
| Explosion-proof compatible | Essential safety explosion-proof specs (flow meter, solenoid valve, handy control panel) *7 | |
| Remarks | For low pressure | For high pressure |
| ※1…Mix precision differs according to paint viscosity, discharge rate, and other use conditions. | ||
| ※2…For paint of 100mPa･s (30sec/FC#4) or more, pump pressure must be at least 0.6MPa (for low pressure). (for low pressure). 。 | ||
| At 30mPa･s (12sec/FC#4) or less, the specified mix precision cannot be maintained. | ||
| ※3…Paint with a viscosity of 30mPa･s (12sec/FC#4) or less may not fit within this range. | ||
| The discharge rate during packing will not exceed the upper limit. | ||
| ※4...Control board size.This size does not include air devices, etc. 。 | ||
| ※*5...For low pressure, about 0.15MPa of mixing device pressure is lost. | ||
| reach a steady discharge rate, 3 times the pressure needed for discharge is supplied. | ||
| Moreover, such pressure is at the path maximum pressure resistance or less. | ||
| ※6…Using a cleaning solution of ample solubility.Water-based paint cannot be used. | ||
| Special metallic paint or paint containing rough particle substances cannot be used in some cases. | ||
| ※*7...Some configuration devices and electrical devices are not explosion proof. | ||
Standard structure
| ACW1200L | ACW1200H | ||
| Mixing Unit | Mixing valve | ● | ● |
| Flow meter | ● | ● | |
| Cleaning valve assemblyASSY | ● | ● | |
| Drain valve | ● | ● | |
| Box | ● | ● | |
| Essential safety explosion-proof solenoid valve (for mixing valve) | ● | ● | |
| ACW controller | ACW controller | ● | ● |
| Buzzer | ● | ● | |
| Lamp (red) | ● | ● | |
| Power Switch | ● | ● | |
| Non-explosion proof solenoid valve (for cleaning valve assembly, drain valve) | ● | ● |
