Square Gear Pump
No.
GPS
Intro.
Gear pump has the advantages of self-priming, constant discharge and low vibration, bi-directional transmission, and small clearance, less change of flow rate with variable viscosity and pressure.
Gear pumps can be used in solvent-based coatin
Gear pumps can be used in solvent-based coatin
Square Alloy Gear Pump：
| Model | GPS06 | GPS12 | GPS18 | GPS30 | GPS60 |
| Material | Alloy | Alloy | Alloy | Alloy | Alloy |
| Output cc/rev. | 0.6 | 1.2 | 1.8 | 3 | 6 |
| Paint inlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" |
| Paint outlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" |
| Temp. range °C | 5- 70 | 5- 70 | 5- 70 | 5- 70 | 5- 70 |
| Max. revolution RPM | 250 | 250 | 250 | 250 | 250 |
| Outside dimension L x Dia. mm | |||||
| Weight g | |||||
| Optional by-pass cleaning | Ѵ | Ѵ | Ѵ | Ѵ | Ѵ |
| Country of original | Germany | Germany | Taiwan | Taiwan | Taiwan |
Square Stainless Steel Gear Pump：
| Model | GPSS06 | GPSS12 | GPSS18 | GPSS30 | GPSS30F | GPSS60 |
| Material | SST | SST | SST | SST | SST | SST |
| Output cc/rev. | 0.6 | 1.2 | 1.8 | 3 | 3 | 6 |
| Paint inlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" |
| Paint outlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" | 3/8" |
| Temp. range °C | 5- 70 | 5- 70 | 5- 70 | 5- 70 | 5- 70 | 5- 70 |
| Max. revolution RPM | 250 | 250 | 250 | 250 | 250 | 250 |
| Outside dimension L x Dia.mm | ||||||
| Weight g | ||||||
| Optional by-pass cleaning | Ѵ | Ѵ | Ѵ | Ѵ | Ѵ | Ѵ |
| Optional axis clean, by-pass clean | Ѵ | |||||
| Country of Original | Germany | Germany | Taiwan | Taiwan | Taiwan | Germany |
English code:
GP ＝ Gear pump
GPS= Gear pump square
GPR= Gear pump round
GPSS= Gear pump square stainless
GPRS= Gear pump round stainless
| It can be matched with frequency motor and servo motor, very precise measurement. |
| According to requirement, material to be treated with alloy steel, stainless steel, tungsten steel and vacuum coating. |
| Hardness HRC91 Degree of Ultra-fine Ductile Tungsten Steel. |
| HRC61 alloy steel, can be vacuum coated up to HV3000. |
| Design of Pump Body with minimum cleaning of dead zones . |
| Adopting advanced and new type of shaft seal, less maintenance and easy replacement. |
| The center positioning pin makes the pump accurate and easy to assemble. |
| By-pass quick cleaning valve can be installed. |
| Special Precision Double Core Bypass Valve Used in Industry with High Reliability Requirements. |
