Round Gear Pump
No.
GPR
Intro.
Gear pump has the advantages of self-priming, constant discharge and low vibration, bi-directional transmission, and small clearance, less change of flow rate with variable viscosity and pressure.
Gear pumps can be used in solvent-based coatin
Gear pumps can be used in solvent-based coatin
Round Alloy Gear Pump：
| Model | GPR08 | GPR15 | GPR0.30 | GPR50 | GPR75 | GPR100 | GPR150 | GPR210 | GPR300 | GPR600 |
| Material | Alloy | Alloy | Alloy | Alloy | Alloy | Alloy | Alloy | Alloy | Alloy | Alloy |
| Outlet cc/rev. | 0.8 | 1.5 | 3 | 5 | 7.5 | 10 | 15 | 21 | 30 | 60 |
| Paint inlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | |
| Paint outlet size pt( f ) | 3/8" | 3/8" | 3/8" | 3/8" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | |
| Temp. range °C | 5- 70 | below 180 | below 180 | below 180 | below 180 | below 180 | below 180 | below 180 | below 180 | |
| Max. revolution RPM | 250 | 300 | 300 | 300 | 300 | 300 | 300 | 300 | ||
| Outside dimension L x dia. mm | 137 x 64 | 143 x 64 | 155 x 64 | 110 x 110 | 110 x 110 | 110 x 110 | 110 x 110 | |||
| Weight kg | 1 | 1.7 | 1.85 | 2.05 | 5.5 | 6 | 6.6 | 7.2 | ||
| Deliverying time | 1 week | Over 1 month | Over 2 months | |||||||
Round Stainless Steel Gear Pump：
| Model | GPRS08 | GPRS15 | GPRS0.30 | GPRS50 | GPRS75 | GPRS100 | GPRS150 | GPRS210 | GPRS300 | GPRS600 |
| Material | SST | SST | SST | SST | SST | SST | SST | SST | SST | SST |
| Outlet cc/rev. | 0.8 | 1.5 | 3 | 5 | 7.5 | 10 | 15 | 21 | 30 | 60 |
| Paint inelt size pt( f ) | 3/8" | |||||||||
| Paint outlet size pt( f ) | 3/8" | |||||||||
| Temp. range °C | 5- 70 | |||||||||
| Max. revolution RPM | 250 | |||||||||
| Outside dimension L x dia. mm | 137 x 64 | 143 x 64 | 155 x 64 | |||||||
| Weight kg | 1.7 | 1.85 | 2.05 | |||||||
| Deliverying time | 1 week | Over 1 month | Over 2 months | |||||||
| It can be matched with frequency motor and servo motor, very precise measurement. |
| According to requirement, material to be treated with alloy steel, stainless steel, tungsten steel and vacuum coating. |
| Hardness HRC91 Degree of Ultra-fine Ductile Tungsten Steel. |
| HRC61 alloy steel, can be vacuum coated up to HV3000. |
| Design of Pump Body with minimum cleaning of dead zones . |
| Adopting advanced and new type of shaft seal, less maintenance and easy replacement. |
| The center positioning pin makes the pump accurate and easy to assemble. |
| By-pass quick cleaning valve can be installed. |
| Special Precision Double Core Bypass Valve Used in Industry with High Reliability Requirements. |
